EP-100 Electric Inboard

$20,995.00

-

Comparable HP:100HP
Voltage:144 Volts
Suggested Battery Package Options:
Deep Cycle AGM – Victron – 12V / 220Ah (12 pack)
Lithium Iron Phosphate – 144V – (Call for custom options)

Congratulations on getting one step closer to purchasing your award-winning Elco Electric Inboard. Select the options and accessories below. 


Download Spec Sheets

Step 1. Select Throttle Control.

Select Throttle Mount Type

Step 2. Select Couplings

Select female for motor and male for prop shaft if needed.

  • *

    Female Coupling for Motor 1-1/4

    $268.00

    Solid hub flange- 4IN X 1-1/4IN bore

    AddRemove

    Male Coupling for Prop Shaft

    $268.00

    4" Flange - Select size based on your prop shaft

    AddRemove

Step 3. Select Batteries & Charger

If you do not have batteries and a charger, you will need to select either AGM or Lithium batteries with the matching charger type. If you already have batteries but need a charger, select the applicable charger based on the type of battery you have.

Step 4. Select Battery Connection Kit

Pre-assembled battery connection cables simplify motor installation. Our 7-foot electric battery cables and 18-inch battery jumper cables are adequately sized based on the motor amp draw. Swaged terminal ends are sealed with epoxy-impregnated heat-shrink tubing where they connect to marine-grade fuse blocks, Anderson motor connectors, and batteries.

  • *

    BATTERY CONNECTION KIT | 96V-144V

    $290.00

    Use this 7ft Battery Connection Harness to connect your batteries.

    Compatible with Following Motors:

    Outboards: EP-30 | EP-50

    Inboards: EP-40 | EP-70 | EP-100

    AddRemove

Step 5. Select Battery Monitor

Battery monitors help you take better care of your battery. Your battery monitor also provides real-time and historical information on voltage, power consumption, and more.

Product total

Options total

Grand total

SKU: EP-100 Category: Tag:

Experience the power and tranquility of Elco’s EP-100 electric inboard. This 100-hp electric inboard boat motor is yet another example of Elco’s commitment to sustainable boating, offering quiet operation that doesn’t compromise on performance. The EP-100 electric inboard’s plug-and-play technology makes it easy to install, so you’ll be out on the water in no time. This 100-hp electric boat motor can be mounted directly to replace a traditional gas or diesel inboard.

The sturdy construction of the EP-100 electric inboard is evident in its water-resistant aluminum housing. A nod to Elco’s heritage, this motor continues the legacy of environmentally responsible boating that started at the 1893 World’s Columbian Exhibition in Chicago.

Elco EP System – Electric Boat Propulsion at Its Finest

The Elco Electric Propulsion System is well engineered using advanced technologies for reliable and outstanding performance. All of Elco’s products are built in the USA.

Elco Electric Motor: Cool, Quiet & Powerful

The entire propulsion system, excluding instrument panel and batteries, is contained in a water resistant cast aluminum finned housing that contains all of the electronics, AC motor, and safety devices. The system is mounted directly in place of a typical marine diesel or gas engine. Whether on the sound, around the bay, along the lake, or on the river, it is highly valuable to protect our waters. The Elco Electric Propulsion System is a highly efficient and extremely durable alternative to fossil fuel options.

* Performance may vary based on operating conditions. The figures provided above relate to travel at between 60 – 80% of hull speed.

** Shore power-50% depth of discharge

To convert from nautical miles (nm) to statute miles multiply nm by 1.15.

With Electric Hybrid system additional kilowatts should be added depending on house loads (1,000 watts equals 1kW)

PURE ELECTRIC PERFORMANCEHYBRID ELECTRIC PERFORMANCE
Cruising speed*
7 – 9 knots7 – 9 knots
Cruising time* 6 – 2 hours81 – 49 hours
Cruising range*34 – 18 nm583 – 437 nm
Recharging time standard charger**3 – 4 hours
Recharging time quick charger**2 – 3 hours
Number of 12 volt 8-D batteries (245 Ah)12 batteries12 batteries
Battery bank voltage in total144 vdc
Amps (maximum)295 amps
Kilowatts (peak output kW rating)73.5 kW
Kilowatts (continuous output kW rating)42.5 kW
ChargerElcon PFC5000
Quick charger (optional)Elcon PFC8000
Genset kilowatt size (AC or DC)*12 – 25 kW
Typical fuel tank capacity for genset (gallons)125 gal
Battery bank voltage144 vdc
Charger(s) required2 – 3 chargers
Genset (continuous output rating)30kW, 25kW, 20kW